Who are you
Consumers
Consumers role
As consumers buy more and more products, product lifecycles consistently decrease. This increases waste volume, such as discarded packaging, batteries, and disused devices. Simple solutions can relieve the pressure.
Effective recycling solutions benefit people, businesses, and the environment. And they are needed more than ever at a time when waste volumes are increasing and efficient ways must be found to recycle electronic devices, batteries, bottles, paper metal, glass, packaging, and more.
Services
Recycling materials for a healthy environment
Sparing resources
Recycling saves valuable raw materials and conserves energy. Our planet’s resources are finite. Only increased use of secondary raw materials can stop the linear economy and conserve available resources.
Maximising space
Our space is finite; landfills poison our environment with hazardous, toxic substances.
A healthier environment
A safer and greener environment improves the quality and enjoyment of our lives.
Saving energy
Recycling means we consume fewer materials, have less waste to treat, and spend less energy mining and refining new raw materials.
Services
Consumer involvement: What can be recycled?
We believe recycling should be simple. However, the participation of all of us, as consumers or citizens is crucial to make it happen.
Our pyramid of decisions and behaviours to promote a circular economy begins in the shop when we choose our product. Do we consider its energy efficiency? Do we verify if the product is recyclable or has recycled materials?
During usage, we should bear in mind some maintenance and care measures to extend our product’s life cycle, including reuse and repair. If there is no option for the product than recycling, let’s give it a second life!
Recycling of waste from A to Z
After being collected, waste is sorted by groups with different characteristics and treatment requirements to be recycled when not reused. The loop is closed when raw materials are reintroduced into the production system.
Learn about the recycling process by selecting the icons below.

Recycling
What can be recycled?
Recycling should be simple. However, with so many types of products and materials, and multiple packaging symbols, it’s not always easy to distinguish what is recyclable from what isn’t.
To help simplify things, we’ve assembled an interactive guide of what you can and can’t recycle, with some general information about what happens during recycling and what can be reused.
Learn about the recycling process by selecting the icons below.
Large domestic appliances
Washing machines, tumble dryers, dishwashing machines, cookers;
The first stage of recycling is decontamination: cables and other electrical components are removed; ballasts, plastics, iron compounds and other metals are separated and recovered. These materials are then sent for further processing and recovery.
Recycling process
1. Pre-shedding decontamination
2. Shredding
3. Separation
Recovered materials
Cables
Concrete
Capacitor
Plastic
Ferrous Metal
Non-Ferrous Metal
Temperature exchange equipment /Cooling appliances
Refrigerators, freezers, automatic cold products delivery machines.
Products include fridges, freezers, and any appliances with refrigerating devices such as water coolers. Some appliances also contain refrigerant gases classified as Ozone Depleting Substances (ODS) such as chlorofluorocarbons (CFC), hydrofluorocarbons (HFC) and hydro-chlorofluorocarbons (HCFC) that are now banned.
These gases are captured and treated in ODS recovery plants. Cold appliance de-pollution entails a variety of processes: compressors are decontaminated to recover ODS and oils; insulating foam is treated to recover ODS; metals are salvaged and resold, and plastics can be reused for new products.
Recycling process
1. Decontamination
2. Shredding
3. Separation
4. Foam decontamination
Recovered materials
Gas
Oil
Capacitor
Plastic
Ferrous Metal
Foam
Display equipment
Televisions, screens, LCD, pc monitors.
Display equipment includes cathode ray tubes (found in old-style TV sets and computer monitors) and flat-screen TVs and computer monitors, such as plasma and liquid crystal displays (LCD).
Cathode ray tubes (CRT) contain hazardous phosphor powder, leaded glass, copper, and other rare metals. These materials can be reused to make new products. Panel and funnel glass from the cathode ray tubes are also recovered. The coating on the funnel glass is removed and the glass is cleaned for new products.
Most LCD TVs use mercury lamps to light the screen. To remove the lamps, the appliance must be disassembled before processing the LCD screen. Research is currently being carried out to develop more effective, automated solutions.
Recycling process
1. Hand dismantling
2. Cathode ray tube separation (Pb, Ba)
3. Crushing and metal removal
4. Glass cleaning
Recovered materials
Ferrous Metal
Foam
Monitor body and electronics
Circuit Board
Leaded glass
Unleaded glass
Small Domestic Appliances
Vacuum cleaners, appliances for sewing, irons, toasters, electric knives, hairdryers, radio sets, electrical and electronic toys, luminaires;
This is the most complicated WEEE stream as a wide variety of materials can be recovered: wood, metal, plastic, glass, and cardboard.
This category includes appliances for cleaning (e.g. vacuum cleaners, carpet sweepers, etc.), appliances used for sewing, knitting, weaving and other processing for textiles, irons and other appliances for ironing, mangling and other care of clothing, toasters, fryers, grinders, coffee machines and equipment for opening or sealing containers or packages, electric knives, appliances for hair cutting, hair drying, tooth brushing, shaving, massage and other body care appliances, clocks, watches and equipment to measure, indicate or registering time, etc.
These appliances are shredded, and plastics are separated from metals. Initial decontamination includes the removal of ink toners, cartridges, batteries, and cables.
Recycling process
1. Manual pretreatment
2. Crushing
3. Picking station
4. Shredding
5. Separation
Recovered materials
Cables
Waste
Plastic
Fine materials
Ferrous Metal
Non-Ferrous Metal
Individual Components
Lamps
Straight fluorescent lamps, compact fluorescent lamps, low-pressure sodium lamps, LED lamps.
This category includes fluorescent tubes and low-energy light bulbs, also known as compact fluorescent lamps (CFL), while old-style filament light bulbs and halogen lights are not categorised as WEEE.
Lamps are crushed and washed or treated in pressurised containers. Specialised machines are used to remove hazardous mercury and phosphor. Then, the remaining material is sorted into glass, metals, and plastics.
Phosphor powder and recovered mercury can be re-used to make new lamps. The crushed glass can be used for furnace linings or, if pure enough, to make new lamps. Aluminium end caps are smelted, and other metals are recycled.
Recycling process
1. Shredding
2. Separation
3. Dust recovery
Recovered materials
Ferrous Metal
Non-Ferrous Metal
Mercury
PV panels
Silicon-based PV panels require normal flat glass treatment and no special removal of the semiconductor layer.
Non-silicon-based PV panels require special semiconductor removal technology and isolation of toxic heavy metals.
Recycling process
1. Remove cables, plug and semiconductor
2. Separate aluminium and glass from the PV module
3. Remove labels
4. Reuse or recycle the EVA film and recover chemical elements such as cadmium and selenium
5. Separate into fractions
(EVA film, Aluminium, Wafer, Cable and plastic plug, Semiconductor, Glass)
6. Recycle the glass fraction in a smelter
Recovered materials
Leaded glass
Individual Components
Plastic
Unleaded glass
Cables
Metal
Cadmium
Batteries
Small producers
You may only place small amounts of batteries onto the market but need a trusted, reliable partner to carry out your obligations. We can do this for you.
Large producers
If your company places significant amounts of batteries onto the market, we offer competitive compliance solutions, as well as expertise in take-back and awareness-raising campaigns.
Recycling process
1. Sorting
2. Shredding
Recovered materials
Plastic
Lead
Cobalt
Nickel
Metal
Manganese
Acid
Mercury
Zinc
Cadmium
Recycling Process
- Collection
- Separation
- Decoating (if coated)
- Melting
- Casting
- Manufacture
Recycling Process
- Collection
- Treatment (including sorting, cleaning and decontamination)
- Crushing and melting
- Manufacture
Recycling Process
- Collection
- Processing (including de-inking, cleaning and screening)
- Manufacture
Recycling Process
- Collection
- Compacting
- Melting
- Casting
- Rolling
- Manufacture
Recycling Process
- Collection
- Sorting and separation
- Shredding
- Treatment
- Manufacture
Recycling Process
- Collection
- Segregation
- Decontamination
- Production
- Final products
IT Equipment
Centralised data processing:
• Mainframes, minicomputers and printer units
Personal computing:
• Personal computers (CPU, mouse, screen and keyboard included), laptop computers (CPU, mouse, screen and keyboard included), notebook computers, notepad computers
• Printers, copying equipment, electrical and electronic typewriters
• Pocket and desk calculators
• Other products and equipment for the collection, storage, processing, presentation or communication of information by electronic means
• User terminals and systems
• Facsimile machine (fax), telex, telephones, pay telephones, cordless telephones, cellular telephones, answering systems
• Other products or equipment of transmitting sound, images or other information by telecommunications
Reuse process
1. Inspection
2. Cleaning
3. Data Sanitation
4. Repair
Recycling process
1. Decontamination
2. Shredding
3. Separation
Recovered materials
Cables
Screens
Capacitors
Plastics
Metals
Batteries
Circuit boards